电子文件完整性检测系统的设计与实现

对电子文件完整性检查的方法进行了研究.电子文件完整性检查主要是关注某个文件是否被更改.利用信息摘要函数强有力的加密机制,识别文件发生的微小变化,只要是入侵者成功的攻击导致文件任何改变,都能被电子文件完整性检测系统发现,从而保证了对电子文件的完整性检查.文章介绍了CRC32、MD5、SHA-1算法的C语言实现.     

海南小型露天采石场矿山地质环境治理方法探讨：以日富石场为例

海南小型露天采石场矿山数量多且呈遍地开花式分布，且不规范的开采对环境造成较大的破坏，与绿色矿山之路背道而行，相对大型矿山规范化的治理，小型矿山治理比较滞后，本文以日富采石场地质环境治理为例，通过摸清当地的地质环境条件，结合矿山现状，因地制宜地制定出日富采石场地质环境治理的具体措施，通过治理可获得林地2.6hm2，矿山安全隐患及地貌景观等矿山地质环境问题得到有效地防治，有效解决农业灌溉及周边虾塘养殖用水缺乏问题，实现较好的社会经济效益，为今后治理类似矿山提供参考。     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Electrochemical performance of in situ LiFePO4 modified by N-doped graphene for Li-ion batteries

LiFePO₄ modified by N-doped graphene (NG) with a three-dimensional conductive network structure was synthesized via a one-step in situ hydrothermal method. The effects of N amount of NG on the phase structure, morphology, and electrochemical properties of LiFePO₄ are investigated in this study. X-ray diffraction (XRD) results show that doping suitable N amounts in NG do not alter the crystal structure of LiFePO_4, and scanning electron microscopy (SEM) images show that NG can slightly reduce the particle size of LiFePO₄. The high-resolution transmission electron microscopy (HRTEM) results show that the LiFePO₄ particles are well covered and connected by NG. The electrochemical performance confirms that LiFePO₄ modified by 20% N-doped graphene (named LFP/NG-4) displays a perfect specific capacity of 166.6 mAh·g^?1 at a rate of 0.2C and can reach 125 mAh·g^?1 at a rate of 5 C. Electrochemical impedance spectroscopy (EIS) results illustrate that the charge transfer resistance value of the LFP/NG-4 composite is only 58.6 Ω, which is very low compared with LiFePO₄. Cyclic voltammetry (CV) tests indicate that the addition of 20% N-doped graphene can effectively reduce electrode polarization and improve reversibility. The LFP/NG-4 composite with a three-dimensional conductive network structure can be regarded as a promising cathode material for Li-ion batteries.     

煤矿井下分体式液压支架起吊装置应用分析

根据煤矿井下综采工作面不同条件下起吊装运液压支架的需求,运用液压支架起吊装置,解决了在井下综采工作面巷道空间狭窄,顶板的平整度差等不利条件下,原有液压支架起吊装置安装困难,起吊平稳性和安全性差的技术性难题.通过对分体式液压支架起吊装置机构的组成及工作原理进行阐述,并对本装置的起吊状态进行了受力分析,验证了起吊液压支架的起吊能力,为进一步设计及油泵选型提供了参考.     

Electrowetting-Assisted Generation of Ultrastable High Charge Densities in Composite Silicon Oxide–Fluoropolymer Electret Samples for Electric Nanogenerators

Electric nanogenerators that directly convert the energy of moving drops into electrical signals require hydrophobic substrates with a high density of static electric charge that is stable in “harsh environments” created by continued exposure to potentially saline water. The recently proposed charge-trapping electric generators (CTEGs) that rely on stacked inorganic oxide–fluoropolymer (FP) composite electrets charged by homogeneous electrowetting-assisted charge injection (h-EWCI) seem to solve both problems, yet the reasons for this success have remained elusive. Here, systematic measurements at variable oxide and FP thickness, charging voltage, and charging time and thermal annealing up to 230 °C are reported, leading to a consistent model of the charging process. It is found to be controlled by an energy barrier at the water-FP interface, followed by trapping at the FP-oxide interface. Protection by the FP layer prevents charge densities up to −1.7 mC m⁻² from degrading and the dielectric strength of SiO₂ enables charge decay times up to 48 h at 230 °C, suggesting lifetimes against thermally activated discharging of thousands of years at room temperature. Combining high dielectric strength oxides and weaker FP top coatings with electrically controlled charging provides a new paradigm for developing ultrastable electrets for applications in energy harvesting and beyond.     

Preparation and antifouling performance of thin inorganic ultrafiltration membrane via assisted sol-gel method with different composition of dual additives

A novel TiO₂ thin film was prepared on the ceramic hollow fiber by the sol-gel method using poly(vinylpyrrolidone) (PVP) and polyvinyl alcohol (PVA) as additives. SEM images verified the formation of TiO₂ layer with various thickness using different composition of titania sols. The effect of the PVP and PVA contents on the TiO₂ sol properties, the separation and the antifouling performance of the ultrafiltration membranes were investigated thoroughly. When the contents of PVP and PVA were 1.0 wt% and 0.8 wt%, respectively, the resultant membrane showed a thickness of 0.55 μm with a pure water flux of 255 L m^?2 h^?1. In addition, the adherent foulant bovine serum albumin was applied to evaluate the antifouling performance. During the three fouling-recovery cycles, the flux recovery ratio and the flux decay ratio maintained about 99% and 30%. The BSA flux and rejection were still 169 L m^?2 h^?1 and 96.9% after the cycles, indicating a superior antifouling property.     

Fabrication and joining mechanism of Nano-Cu/Si3N4 ceramic substrates

A novel method for fabricating a nano-Cu/Si₃N₄ ceramic substrate is proposed. The nano-Cu/Si₃N₄ ceramic substrate is first fabricated using spark plasma sintering (SPS) with the addition of nanoscale multilayer films (Ti/TiN/Ti/TiN/Ti) as transition layers. The microstructures of the nano-Cu metal layer and the interface between Cu and Si₃N₄ are investigated. The results show that a higher SPS temperature increases the grain size of the nano-Cu metal layer and affects the hardness. The microstructure of the transition layer evolves significantly after SPS. Ti in the transition layer can react with Si₃N₄ and with nano-Cu to form interfacial reaction layers of TiN and Ti–Cu, respectively; these ensure stronger bonding between nano-Cu and Si₃N₄. Higher SPS temperatures improve the diffusion ability of Ti and Cu, inducing the formation of Ti₃Cu₃O compounds in the nano-Cu metal layer and Ti₂Cu in the transition layer. This study provides an important strategy for designing and constructing a new type of ceramic substrate.     

SBS Thermoplastic Elastomer Based on Dynamic Metal-Ligand Bond: Structure,Mechanical Properties,and Shape Memory Behavior

A Cooper(II) (Cu²⁺)-nitrogen coordination-crosslinked network is designed in poly(styrene-co-butadiene-co-styrene) (SBS) to change commercial elastomers into advanced soft materials. Herein, ligand groups into SBS molecular chains by the 3,6-di(2-pyridyl)-1,2,4,5-tetrazine (DPT) click reaction are first introduced. The results from fourier transform infrared (FT-IR), 1H-nuclear magnetic resonance, and X-ray photoelectron spectroscopy (XPS) are verified the successful modification of SBS. The DPT-grafted SBS could then coordinate with copper sulfate (CuSO₄) to form a Cu²⁺-nitrogen bond, which is further characterized using FT-IR, XPS, atomic force microscope, scanning electron microscope, and geometric structure calculations. After modifying SBS to form an SBS-DPT/CuSO₄ composite (SBS-DPT2-Cu10), the tensile stress is improved from 11.43 to 23.25 MPa, while the elongation at break is remained almost unchanged, and the corresponding toughness is increased from 33.21 to 63.26 MJ m^–3. Moreover, the dynamic nature of the Cu²⁺-nitrogen coordination bonds enables the SBS-DPT/CuSO₄ composite to exhibit sustained thermoplastic performance and excellent shape memory behavior under an external thermal stimulus.     

Spatiotemporal Magnetocaloric Microenvironment for Guiding the Fate of Biodegradable Polymer Implants

The degradation behavior of implants is significantly important for bone repair. However, it is still unprocurable to spatiotemporally regulate the degradation of the implants to match bone ingrowth. In this paper, a magneto-controlled biodegradation model is established to explore the degradation behavior of magnetic scaffolds in a magnetothermal microenvironment generated by an alternating magnetic field (AMF). The results demonstrate that the scaffolds can be heated by magnetic nanoparticles (NPs) under AMF, which dramatically accelerated scaffold degradation. Especially, magnetic NPs modified by oleic acid with a better interface compatibility exhibit a greater heating efficiency to further facilitate the degradation. Furthermore, the molecular dynamics simulations reveal that the enhanced motion correlation between magnetic NPs and polymer matrix can accelerate the energy transfer. As a proof-of-concept, the feasibility of magneto-controlled degradation for implants is demonstrated, and an optimizing strategy for better heating efficiency of nanomaterials is provided, which may have great instructive significance for clinical medicine.